Victron
Victron Argofet 200-2 200A 2 Batteries FET Isolator
Victron ARGOFET Isolator 200-2
The Victron ARGOFET Isolator 200-2 is the perfect solution to supply two separate battery circuits from a single power source. Whether from the alternator or a charger, this isolator delivers up to 200A charging current and ensures that the batteries do not discharge or influence each other.
Efficient Performance
Unlike conventional battery isolation diodes, the ARGOFET Isolator generates almost no voltage loss. This means that you can benefit from higher efficiency. At low currents, the voltage drop is less than 0.02 Volts, and at higher currents only 0.1 Volts. Therefore, no additional voltage increase is necessary.
Technical Features
- Maximum Charging Current: 200A
- Connections for 2 Battery Circuits
- Voltage Loss: less than 0.02V at low currents and 0.1V at high currents
- 5 Years Warranty on Victron Quality
Why ARGOFET?
An example for illustration: A 100A current has a voltage loss of 0.26 Volts with a cable length of 10 m and a cable cross-section of 50 mm². With 5 m of cable with 10 mm², a 50A current causes a loss of 0.35 Volts. This makes the FET Isolator one of the most efficient charging current distributors on the market.
Scope of Delivery
- 1x Victron ARG200201020R ARGOFET Isolator 200A / 2 Batteries
- 1x User Manual
