Victron Energy | Pytes | Offgridtec
Offgridtec Backup Kit 10,24kWh Pytes V5a Battery - Victron MultiPlus II 48/3000 Inverter Three-Phase with Energy Meter
3-Phase Backup System
The 3-phase backup systems are ideal for emergency power supply or for expanding an existing solar system. With powerful lithium-ion batteries from Pytes, a suitable MultiPlus-II device combination and a Cerbo GX MK2 for system monitoring, you can ensure your energy supply even in the event of a power outage.
Advantages and Applications
- Emergency Power Supply
- Off-Grid Solar Systems (Island Systems)
- Retrofitting Existing PV Systems
- Grid-Connected Power Supply
- UPS Systems
Scope of Delivery of the Backup System
- Pytes V5a LiFePO4 Battery 5,12kWh 51,2V 100Ah (1x or 2x, depending on selection)
- 3x Victron MultiPlus-II 48/3000/35-32 230V
- 1x Victron Cerbo GX MK2 Communication Center
- 1x Victron GX Touch 50 Display Panel
- 2x Victron Lynx Distributor (M8)
- 1x Victron MK3-USB VE.Bus to USB Interface
- 3x Offgridtec® 1m Battery Cable 35mm² with M8 Lugs
- 2x 0,9m Victron RJ45 UTP Cable
- 1x 3m Victron RJ45 UTP Cable
- 3x Offgridtec 5-piece Set MEGA-Fuse 125A 70V for 48V Systems
- 1x Pytes Data Cable Battery to Victron GX 3,5m
- Pytes Battery Connection Cable Set V5a 2m M10 50mm² to Amphenol 10mm (1x or 2x, depending on selection)
- If Energy Meter is Selected: 1x Victron VM-3P75CT Energy Meter
- 1x Victron 5m RJ45 UTP Cable
Extended Use of the Backup System
The backup kit can optionally be supplied with or without a Victron energy meter and cable. An energy meter is required for setting up an Energy Storage System. With this energy meter, you can perform a grid-parallel installation and monitor your energy consumption as well as energy costs.
The Storage Solution – Pytes V5a
The V5 alpha battery module from Pytes offers you a long lifespan and high cycle stability. With a nominal voltage of 51,2V and a capacity of 5,12kWh, the battery provides excellent performance. It is easy to install and expandable up to 430kWh.
Technical Data - Pytes V5a
Battery Chemistry: LiFePO4
Nominal Voltage: 51,2 V
Voltage Range: 44,8 - 57,6 V
Net Capacity: 100 Ah
Nominal Energy: 5,12 kWh
Recommended Charge Current/Discharge Current: 75 A
Max. Continuous Charge Current/Discharge Current: 100 A
Peak Charge/Discharge: 150 A (15 sec.)
Operating Temperature Range: -10°C - +55°C
Weight: 44 kg
Dimensions: 440 x 530 x 140 mm
The Electronics Core – Victron MultiPlus-II
The MultiPlus-II is a high-end device combination that can be used as a backup device in grid-connected and off-grid systems. It offers a power of 3000W with non-linear load.
Technical Data - Victron MultiPlus-II
Continuous Load: 2400W
Peak Power: 6000W for 48V Battery Voltage
Transfer Switch: 32A
Battery Charger: 35A
Output Voltage: 230 VAC, Frequency: 50 Hz
Max. Efficiency: 95%
Protection Class: IP22
System Monitoring with Victron Cerbo GX MK2
With the Cerbo GX MK2 Communication Center, you can easily control and monitor your system. Control is remotely possible and with the GX Touch 50 Display, you always have all system parameters in view.
Safety Note: Only have this complete system installed and commissioned by a qualified electrician.
